Autonomous Outdoor Vacuum Sweeper
Couldn't load pickup availability
Autonomics A302 Autonomous Outdoor Vacuum Sweeper
The Autonomics A302 is a fully electric, autonomous outdoor cleaning robot that combines side-brush sweeping, powerful vacuum collection, and water-based dust suppression. Designed for asphalt, concrete, and paved hard surfaces, it automates routine debris collection to help keep outdoor spaces clean with less manual labor.
Ideal applications include parks, recreation facilities, gated communities, pedestrian walkways, bicycle lanes, parking areas, commercial properties, and industrial campuses.
Sweep and Vacuum in One Pass
Two powered side brushes direct loose debris toward a floating vacuum inlet that follows the underlying surface. The vacuum system lifts dust, sand, leaves, cigarette butts, and ordinary paper and plastic litter into the debris container. An automatic inlet shutter opens to accommodate leaves and larger debris.
A 45.3" cleaning width and manufacturer-rated maximum coverage of approximately 61,900 Sq. Ft. per hour support efficient cleaning across large outdoor areas. Adjustable vacuum power lets operators tailor suction to different cleaning conditions.
Actual productivity depends on the layout, debris load, obstacles, cleaning settings, and servicing requirements.
Large Debris Container and Automatic Dumping
A 37-gallon stainless-steel debris container provides substantial capacity for outdoor litter collection. An internal mesh separator helps prevent larger debris from entering the vacuum turbine.
The integrated hydraulic lifting system enables automatic debris dumping. Combined with a compatible maintenance station, this feature reduces manual handling between cleaning cycles.
Water-Based Dust Suppression
The A302 carries 15.3 gallons of water for dust suppression and particle filtration. Mist nozzles near the side brushes help prevent dust from becoming airborne, while an additional nozzle inside the vacuum duct moistens fine particles so they settle in the debris container.
This water-based system eliminates the need for disposable paper dust filters and a central sweeping broom, helping reduce consumable requirements. Side brushes, water filters, nozzles, and other service components still require routine maintenance.
Autonomous Navigation and Obstacle Detection
The A302 combines GPS RTK positioning and visual odometry with LiDAR, depth cameras, and ultrasonic sensors to navigate configured routes and detect obstacles.
Its vision system identifies pedestrians, vehicles, curbs, buildings, poles, fences, and vegetation in daylight and low-light conditions. Operators can define cleaning zones, transport routes, and restricted areas to guide repeatable cleaning across the property.
Cloud-Based Scheduling, Monitoring, and Reporting
Autonomics FLEET provides centralized tools for managing daily cleaning operations, including:
- Map-based cleaning-zone and transport-route configuration
- Automatic cleaning-path planning
- Calendar-based task scheduling
- Remote task starting, pausing, and stopping
- Real-time location, cleaning-progress, and technical-status monitoring
- Performance reporting
- Mobile notifications for completed tasks and operating errors
These tools help facility teams coordinate recurring cleaning and track completed work.
Electric Power for Extended Cleaning
A 48-volt, 200-amp-hour lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on cleaning settings and operating conditions.
The included manual charger provides a full charge in approximately four hours. An optional contactless charging station enables autonomous docking and recharging.
An optional fluid-based cooling system supports operation in hot climates, extending the published operating-temperature limit from 113°F to 140°F when appropriately equipped.
Safety and Visibility Features
Two emergency-stop buttons provide access from either side of the robot. Front headlights, turn indicators, a rear warning light, side strobe beacons, and audible alerts help make the machine visible and communicate its movement.
Activating an emergency stop halts movement and cleaning equipment and sends an alert through the Fleet Management System.
Optional Automated Maintenance Dock
The optional Autonomics DOCK combines multiple servicing functions in one station, including automatic debris dumping, water replenishment, body washing, waste-container washing, drying, and charging.
This configuration reduces manual servicing between cleaning cycles and supports repeated scheduled operation.
Specs
- Cleaning Functions: Side-brush sweeping and vacuum collection
- Cleaning Width: 45.3"
- Maximum Cleaning Coverage: Approximately 61,900 Sq. Ft./Hour
- Debris Container: 37 gallons
- Dust-Suppression Water Capacity: 15.3 gallons
- Debris Dumping: Hydraulic automatic dumping
- Water Replenishment: Manual or automatic with compatible dock
- Published Runtime: 4–6 hours
- Battery: Lithium iron phosphate, 48 volts, 200 amp-hours
- Manual Charging Time: Approximately 4 hours
- Optional Contactless Charging Time: Approximately 4.2 hours
- Max Cleaning Speed: 3.1 mph
- Max Travel Speed: 4.3 mph
- Max Slope: 12°, as listed in the manual’s specification table
- Maximum Ditch-Crossing Width: 2.8"
- Max Bump-Crossing Height: 2.8"
- Min Turning Radius: 78.7"
- Dimensions: 75.3" L × 41.9" W × 45.2" H
- Listed Machine Weight: Approximately 1,190 Lbs.
- Standard Operating Temperature: 32°F to 113°F
- Operating Temperature With Optional Fluid Cooling: 32°F to 140°F
- Navigation: GPS RTK and visual odometry
- Obstacle Detection: LiDAR, depth cameras, and ultrasonic sensors
- Connectivity: Cellular internet required; confirm supplied 4G/5G configuration
- Fleet Management: Autonomics FLEET cloud platform
Operating Requirements
Designed for designated outdoor hard surfaces, the A302 collects dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris sizes up to approximately 3.1" and gravel up to approximately 2".
Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance. The water-based dust-suppression system must remain functional and supplied with water during cleaning.
Use is limited to dry conditions without rain, snow, or heavy fog. Wet pavement and deep puddles must be avoided. The A302 is not intended for public-road cleaning or collection of branches, ropes, hazardous materials, or hot waste.
In the Box
Included components vary by configuration and quotation. Confirm the supplied robot, charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare before ordering.
Media
Product videos and supporting documents are available from Hero LifeCare upon request.
FAQs
Is deployment and operator training available?
Hero LifeCare can help with site review, setup, operator training, and ongoing support for this model.
What is included with the robot?
Included equipment depends on the selected configuration. Confirm the current quote for charging equipment, accessories, documentation, and optional attachments or workstations.
Are service and extended coverage options available?
Contact Hero LifeCare to review available service plans and extended coverage for this robot.
Autonomics A302 Autonomous Outdoor Vacuum Sweeper
The Autonomics A302 is a fully electric, autonomous outdoor cleaning robot that combines side-brush sweeping, powerful vacuum collection, and water-based dust suppression. Designed for asphalt, concrete, and paved hard surfaces, it automates routine debris collection to help keep outdoor spaces clean with less manual labor.
Ideal applications include parks, recreation facilities, gated communities, pedestrian walkways, bicycle lanes, parking areas, commercial properties, and industrial campuses.
Sweep and Vacuum in One Pass
Two powered side brushes direct loose debris toward a floating vacuum inlet that follows the underlying surface. The vacuum system lifts dust, sand, leaves, cigarette butts, and ordinary paper and plastic litter into the debris container. An automatic inlet shutter opens to accommodate leaves and larger debris.
A 45.3" cleaning width and manufacturer-rated maximum coverage of approximately 61,900 Sq. Ft. per hour support efficient cleaning across large outdoor areas. Adjustable vacuum power lets operators tailor suction to different cleaning conditions.
Actual productivity depends on the layout, debris load, obstacles, cleaning settings, and servicing requirements.
Large Debris Container and Automatic Dumping
A 37-gallon stainless-steel debris container provides substantial capacity for outdoor litter collection. An internal mesh separator helps prevent larger debris from entering the vacuum turbine.
The integrated hydraulic lifting system enables automatic debris dumping. Combined with a compatible maintenance station, this feature reduces manual handling between cleaning cycles.
Water-Based Dust Suppression
The A302 carries 15.3 gallons of water for dust suppression and particle filtration. Mist nozzles near the side brushes help prevent dust from becoming airborne, while an additional nozzle inside the vacuum duct moistens fine particles so they settle in the debris container.
This water-based system eliminates the need for disposable paper dust filters and a central sweeping broom, helping reduce consumable requirements. Side brushes, water filters, nozzles, and other service components still require routine maintenance.
Autonomous Navigation and Obstacle Detection
The A302 combines GPS RTK positioning and visual odometry with LiDAR, depth cameras, and ultrasonic sensors to navigate configured routes and detect obstacles.
Its vision system identifies pedestrians, vehicles, curbs, buildings, poles, fences, and vegetation in daylight and low-light conditions. Operators can define cleaning zones, transport routes, and restricted areas to guide repeatable cleaning across the property.
Cloud-Based Scheduling, Monitoring, and Reporting
Autonomics FLEET provides centralized tools for managing daily cleaning operations, including:
- Map-based cleaning-zone and transport-route configuration
- Automatic cleaning-path planning
- Calendar-based task scheduling
- Remote task starting, pausing, and stopping
- Real-time location, cleaning-progress, and technical-status monitoring
- Performance reporting
- Mobile notifications for completed tasks and operating errors
These tools help facility teams coordinate recurring cleaning and track completed work.
Electric Power for Extended Cleaning
A 48-volt, 200-amp-hour lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on cleaning settings and operating conditions.
The included manual charger provides a full charge in approximately four hours. An optional contactless charging station enables autonomous docking and recharging.
An optional fluid-based cooling system supports operation in hot climates, extending the published operating-temperature limit from 113°F to 140°F when appropriately equipped.
Safety and Visibility Features
Two emergency-stop buttons provide access from either side of the robot. Front headlights, turn indicators, a rear warning light, side strobe beacons, and audible alerts help make the machine visible and communicate its movement.
Activating an emergency stop halts movement and cleaning equipment and sends an alert through the Fleet Management System.
Optional Automated Maintenance Dock
The optional Autonomics DOCK combines multiple servicing functions in one station, including automatic debris dumping, water replenishment, body washing, waste-container washing, drying, and charging.
This configuration reduces manual servicing between cleaning cycles and supports repeated scheduled operation.
Specs
- Cleaning Functions: Side-brush sweeping and vacuum collection
- Cleaning Width: 45.3"
- Maximum Cleaning Coverage: Approximately 61,900 Sq. Ft./Hour
- Debris Container: 37 gallons
- Dust-Suppression Water Capacity: 15.3 gallons
- Debris Dumping: Hydraulic automatic dumping
- Water Replenishment: Manual or automatic with compatible dock
- Published Runtime: 4–6 hours
- Battery: Lithium iron phosphate, 48 volts, 200 amp-hours
- Manual Charging Time: Approximately 4 hours
- Optional Contactless Charging Time: Approximately 4.2 hours
- Max Cleaning Speed: 3.1 mph
- Max Travel Speed: 4.3 mph
- Max Slope: 12°, as listed in the manual’s specification table
- Maximum Ditch-Crossing Width: 2.8"
- Max Bump-Crossing Height: 2.8"
- Min Turning Radius: 78.7"
- Dimensions: 75.3" L × 41.9" W × 45.2" H
- Listed Machine Weight: Approximately 1,190 Lbs.
- Standard Operating Temperature: 32°F to 113°F
- Operating Temperature With Optional Fluid Cooling: 32°F to 140°F
- Navigation: GPS RTK and visual odometry
- Obstacle Detection: LiDAR, depth cameras, and ultrasonic sensors
- Connectivity: Cellular internet required; confirm supplied 4G/5G configuration
- Fleet Management: Autonomics FLEET cloud platform
Operating Requirements
Designed for designated outdoor hard surfaces, the A302 collects dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris sizes up to approximately 3.1" and gravel up to approximately 2".
Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance. The water-based dust-suppression system must remain functional and supplied with water during cleaning.
Use is limited to dry conditions without rain, snow, or heavy fog. Wet pavement and deep puddles must be avoided. The A302 is not intended for public-road cleaning or collection of branches, ropes, hazardous materials, or hot waste.
In the Box
Included components vary by configuration and quotation. Confirm the supplied robot, charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare before ordering.
Media
Product videos and supporting documents are available from Hero LifeCare upon request.
FAQs
Is deployment and operator training available?
Hero LifeCare can help with site review, setup, operator training, and ongoing support for this model.
What is included with the robot?
Included equipment depends on the selected configuration. Confirm the current quote for charging equipment, accessories, documentation, and optional attachments or workstations.
Are service and extended coverage options available?
Contact Hero LifeCare to review available service plans and extended coverage for this robot.
- Three cleaning actions in one pass: Sweeps, vacuums, and helps suppress dust on suitable outdoor hard surfaces.
- Wide cleaning path: A 45.3-inch cleaning width supports efficient coverage of walkways, parking areas, and campuses.
- Powered side brushes and floating vacuum inlet: Direct common debris such as leaves, sand, dust, and ordinary litter into the collection system.
- High-capacity debris collection: The 37-gallon stainless-steel container includes a mesh separator and hydraulic automatic dumping.
- Water-based dust suppression: A 15.3-gallon water capacity supplies mist nozzles at the brushes and vacuum duct to help control airborne particles.
- Autonomous navigation and sensing: GPS RTK, visual odometry, LiDAR, depth cameras, and ultrasonic sensors support configured routes and obstacle detection.
- Fleet scheduling and monitoring: Autonomics FLEET offers mapped zones, scheduled tasks, remote controls, status monitoring, reports, and notifications.
- Rechargeable electric operation: The 48 V, 200 Ah lithium iron phosphate battery provides a published runtime of approximately 4–6 hours, depending on conditions.
- Optional service dock: The compatible Autonomics DOCK can support dumping, water replenishment, washing, drying, and charging between cleaning cycles.
- Designed for dry-weather deployment: Suitable for designated paved outdoor areas; avoid rain, snow, heavy fog, wet pavement, and deep puddles.
| Specification | Details |
|---|---|
| Model | Autonomics A302 |
| Product type | Autonomous Outdoor Vacuum Sweeper |
| Recommended surfaces | Designated outdoor hard surfaces, including asphalt, concrete, and paving |
| Maximum cleaning width | 45.3 inches |
| Rated maximum coverage | Approximately 61,900 square feet per hour; actual productivity varies by site conditions and settings |
| Debris container | 37-gallon stainless-steel container with mesh separator and hydraulic automatic dumping |
| Water capacity | 15.3 gallons |
| Battery | 48 V, 200 Ah lithium iron phosphate (LiFePO4) |
| Published runtime | Approximately 4–6 hours, depending on operating conditions |
| Navigation and sensing | GPS RTK, visual odometry, LiDAR, depth cameras, and ultrasonic sensors |
| Fleet platform | Autonomics FLEET, with mapped zones, task scheduling, remote controls, monitoring, reports, and notifications |
| Optional accessory | Autonomics DOCK for supported debris dumping, water replenishment, washing, drying, and charging functions |
-
What surfaces can the Autonomics A302 clean?
This Autonomous Outdoor Vacuum Sweeper is intended for designated paved hard surfaces such as asphalt, concrete, and paving. It can be used in suitable walkways, parking areas, campuses, parks, and other commercial outdoor spaces.
-
What types of debris does the A302 collect?
Its powered side brushes guide common outdoor debris—including dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter—toward the vacuum inlet and collection container. It is not designed for hazardous, hot, or oversized waste.
-
How much area can it clean per hour?
The manufacturer-rated maximum coverage is approximately 61,900 square feet per hour, with a 45.3-inch cleaning width. Actual productivity depends on site layout, debris, settings, and operating conditions.
-
How long does the battery run?
The 48 V, 200 Ah lithium iron phosphate battery has a published runtime of approximately 4–6 hours. Actual runtime varies with conditions and use.
-
How does the robot manage routes and obstacles?
GPS RTK, visual odometry, LiDAR, depth cameras, and ultrasonic sensors support configured routes and obstacle detection. Operators can map zones, travel paths, and restricted areas and monitor tasks through Autonomics FLEET.
-
Can the A302 operate in rain or on wet pavement?
No. The A302 is intended for dry-weather operation. Avoid rain, snow, heavy fog, wet pavement, and deep puddles, and confirm that the site is suitable before deployment.
-
What maintenance support is available?
Regular maintenance is required. The optional compatible Autonomics DOCK can support debris dumping, water replenishment, washing, drying, and charging; confirm service requirements and compatibility for your installation.
Warranty information: Warranty duration, coverage terms, exclusions, and service procedures were not provided in the available product information. Contact the seller or Autonomics to confirm the current warranty and protection details before purchase.
Autonomics A302 Autonomous Outdoor Vacuum Sweeper
The Autonomics A302 is a fully electric, autonomous outdoor cleaning robot that combines side-brush sweeping, powerful vacuum collection, and water-based dust suppression. Designed for asphalt, concrete, and paved hard surfaces, it automates routine debris collection to help keep outdoor spaces clean with less manual labor.
Ideal applications include parks, recreation facilities, gated communities, pedestrian walkways, bicycle lanes, parking areas, commercial properties, and industrial campuses.
Sweep and Vacuum in One Pass
Two powered side brushes direct loose debris toward a floating vacuum inlet that follows the underlying surface. The vacuum system lifts dust, sand, leaves, cigarette butts, and ordinary paper and plastic litter into the debris container. An automatic inlet shutter opens to accommodate leaves and larger debris.
A 45.3" cleaning width and manufacturer-rated maximum coverage of approximately 61,900 Sq. Ft. per hour support efficient cleaning across large outdoor areas. Adjustable vacuum power lets operators tailor suction to different cleaning conditions.
Actual productivity depends on the layout, debris load, obstacles, cleaning settings, and servicing requirements.
Large Debris Container and Automatic Dumping
A 37-gallon stainless-steel debris container provides substantial capacity for outdoor litter collection. An internal mesh separator helps prevent larger debris from entering the vacuum turbine.
The integrated hydraulic lifting system enables automatic debris dumping. Combined with a compatible maintenance station, this feature reduces manual handling between cleaning cycles.
Water-Based Dust Suppression
The A302 carries 15.3 gallons of water for dust suppression and particle filtration. Mist nozzles near the side brushes help prevent dust from becoming airborne, while an additional nozzle inside the vacuum duct moistens fine particles so they settle in the debris container.
This water-based system eliminates the need for disposable paper dust filters and a central sweeping broom, helping reduce consumable requirements. Side brushes, water filters, nozzles, and other service components still require routine maintenance.
Autonomous Navigation and Obstacle Detection
The A302 combines GPS RTK positioning and visual odometry with LiDAR, depth cameras, and ultrasonic sensors to navigate configured routes and detect obstacles.
Its vision system identifies pedestrians, vehicles, curbs, buildings, poles, fences, and vegetation in daylight and low-light conditions. Operators can define cleaning zones, transport routes, and restricted areas to guide repeatable cleaning across the property.
Cloud-Based Scheduling, Monitoring, and Reporting
Autonomics FLEET provides centralized tools for managing daily cleaning operations, including:
- Map-based cleaning-zone and transport-route configuration
- Automatic cleaning-path planning
- Calendar-based task scheduling
- Remote task starting, pausing, and stopping
- Real-time location, cleaning-progress, and technical-status monitoring
- Performance reporting
- Mobile notifications for completed tasks and operating errors
These tools help facility teams coordinate recurring cleaning and track completed work.
Electric Power for Extended Cleaning
A 48-volt, 200-amp-hour lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on cleaning settings and operating conditions.
The included manual charger provides a full charge in approximately four hours. An optional contactless charging station enables autonomous docking and recharging.
An optional fluid-based cooling system supports operation in hot climates, extending the published operating-temperature limit from 113°F to 140°F when appropriately equipped.
Safety and Visibility Features
Two emergency-stop buttons provide access from either side of the robot. Front headlights, turn indicators, a rear warning light, side strobe beacons, and audible alerts help make the machine visible and communicate its movement.
Activating an emergency stop halts movement and cleaning equipment and sends an alert through the Fleet Management System.
Optional Automated Maintenance Dock
The optional Autonomics DOCK combines multiple servicing functions in one station, including automatic debris dumping, water replenishment, body washing, waste-container washing, drying, and charging.
This configuration reduces manual servicing between cleaning cycles and supports repeated scheduled operation.
Specs
- Cleaning Functions: Side-brush sweeping and vacuum collection
- Cleaning Width: 45.3"
- Maximum Cleaning Coverage: Approximately 61,900 Sq. Ft./Hour
- Debris Container: 37 gallons
- Dust-Suppression Water Capacity: 15.3 gallons
- Debris Dumping: Hydraulic automatic dumping
- Water Replenishment: Manual or automatic with compatible dock
- Published Runtime: 4–6 hours
- Battery: Lithium iron phosphate, 48 volts, 200 amp-hours
- Manual Charging Time: Approximately 4 hours
- Optional Contactless Charging Time: Approximately 4.2 hours
- Max Cleaning Speed: 3.1 mph
- Max Travel Speed: 4.3 mph
- Max Slope: 12°, as listed in the manual’s specification table
- Maximum Ditch-Crossing Width: 2.8"
- Max Bump-Crossing Height: 2.8"
- Min Turning Radius: 78.7"
- Dimensions: 75.3" L × 41.9" W × 45.2" H
- Listed Machine Weight: Approximately 1,190 Lbs.
- Standard Operating Temperature: 32°F to 113°F
- Operating Temperature With Optional Fluid Cooling: 32°F to 140°F
- Navigation: GPS RTK and visual odometry
- Obstacle Detection: LiDAR, depth cameras, and ultrasonic sensors
- Connectivity: Cellular internet required; confirm supplied 4G/5G configuration
- Fleet Management: Autonomics FLEET cloud platform
Operating Requirements
Designed for designated outdoor hard surfaces, the A302 collects dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris sizes up to approximately 3.1" and gravel up to approximately 2".
Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance. The water-based dust-suppression system must remain functional and supplied with water during cleaning.
Use is limited to dry conditions without rain, snow, or heavy fog. Wet pavement and deep puddles must be avoided. The A302 is not intended for public-road cleaning or collection of branches, ropes, hazardous materials, or hot waste.
In the Box
Included components vary by configuration and quotation. Confirm the supplied robot, charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare before ordering.
Media
Product videos and supporting documents are available from Hero LifeCare upon request.
FAQs
Is deployment and operator training available?
Hero LifeCare can help with site review, setup, operator training, and ongoing support for this model.
What is included with the robot?
Included equipment depends on the selected configuration. Confirm the current quote for charging equipment, accessories, documentation, and optional attachments or workstations.
Are service and extended coverage options available?
Contact Hero LifeCare to review available service plans and extended coverage for this robot.
- Three cleaning actions in one pass: Sweeps, vacuums, and helps suppress dust on suitable outdoor hard surfaces.
- Wide cleaning path: A 45.3-inch cleaning width supports efficient coverage of walkways, parking areas, and campuses.
- Powered side brushes and floating vacuum inlet: Direct common debris such as leaves, sand, dust, and ordinary litter into the collection system.
- High-capacity debris collection: The 37-gallon stainless-steel container includes a mesh separator and hydraulic automatic dumping.
- Water-based dust suppression: A 15.3-gallon water capacity supplies mist nozzles at the brushes and vacuum duct to help control airborne particles.
- Autonomous navigation and sensing: GPS RTK, visual odometry, LiDAR, depth cameras, and ultrasonic sensors support configured routes and obstacle detection.
- Fleet scheduling and monitoring: Autonomics FLEET offers mapped zones, scheduled tasks, remote controls, status monitoring, reports, and notifications.
- Rechargeable electric operation: The 48 V, 200 Ah lithium iron phosphate battery provides a published runtime of approximately 4–6 hours, depending on conditions.
- Optional service dock: The compatible Autonomics DOCK can support dumping, water replenishment, washing, drying, and charging between cleaning cycles.
- Designed for dry-weather deployment: Suitable for designated paved outdoor areas; avoid rain, snow, heavy fog, wet pavement, and deep puddles.
| Specification | Details |
|---|---|
| Model | Autonomics A302 |
| Product type | Autonomous Outdoor Vacuum Sweeper |
| Recommended surfaces | Designated outdoor hard surfaces, including asphalt, concrete, and paving |
| Maximum cleaning width | 45.3 inches |
| Rated maximum coverage | Approximately 61,900 square feet per hour; actual productivity varies by site conditions and settings |
| Debris container | 37-gallon stainless-steel container with mesh separator and hydraulic automatic dumping |
| Water capacity | 15.3 gallons |
| Battery | 48 V, 200 Ah lithium iron phosphate (LiFePO4) |
| Published runtime | Approximately 4–6 hours, depending on operating conditions |
| Navigation and sensing | GPS RTK, visual odometry, LiDAR, depth cameras, and ultrasonic sensors |
| Fleet platform | Autonomics FLEET, with mapped zones, task scheduling, remote controls, monitoring, reports, and notifications |
| Optional accessory | Autonomics DOCK for supported debris dumping, water replenishment, washing, drying, and charging functions |
-
What surfaces can the Autonomics A302 clean?
This Autonomous Outdoor Vacuum Sweeper is intended for designated paved hard surfaces such as asphalt, concrete, and paving. It can be used in suitable walkways, parking areas, campuses, parks, and other commercial outdoor spaces.
-
What types of debris does the A302 collect?
Its powered side brushes guide common outdoor debris—including dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter—toward the vacuum inlet and collection container. It is not designed for hazardous, hot, or oversized waste.
-
How much area can it clean per hour?
The manufacturer-rated maximum coverage is approximately 61,900 square feet per hour, with a 45.3-inch cleaning width. Actual productivity depends on site layout, debris, settings, and operating conditions.
-
How long does the battery run?
The 48 V, 200 Ah lithium iron phosphate battery has a published runtime of approximately 4–6 hours. Actual runtime varies with conditions and use.
-
How does the robot manage routes and obstacles?
GPS RTK, visual odometry, LiDAR, depth cameras, and ultrasonic sensors support configured routes and obstacle detection. Operators can map zones, travel paths, and restricted areas and monitor tasks through Autonomics FLEET.
-
Can the A302 operate in rain or on wet pavement?
No. The A302 is intended for dry-weather operation. Avoid rain, snow, heavy fog, wet pavement, and deep puddles, and confirm that the site is suitable before deployment.
-
What maintenance support is available?
Regular maintenance is required. The optional compatible Autonomics DOCK can support debris dumping, water replenishment, washing, drying, and charging; confirm service requirements and compatibility for your installation.
Warranty information: Warranty duration, coverage terms, exclusions, and service procedures were not provided in the available product information. Contact the seller or Autonomics to confirm the current warranty and protection details before purchase.
