Autonomics COMBO: Autonomous Sweeper/Scrubber

SKU: 6aed4b5d268ea
In stock
Regular price $132,300.00

Autonomics COMBO A302-1 Autonomous Sweeper/Scrubber

The Autonomics COMBO A302-1 is a fully electric, autonomous cleaning robot that combines sweeping, vacuum collection, and floor washing in one pass. Designed for large indoor and outdoor hard-surface areas, it collects loose debris while washing the floor, reducing the need for separate pre-sweeping and scrubbing operations.

Ideal applications include warehouses, manufacturing facilities, commercial properties, tiled public spaces, covered parking areas, and industrial campuses.

Sweep, vacuum, and wash in one pass

The COMBO combines side-brush sweeping and vacuum suction with an integrated floor-washing assembly. It collects dust, dirt, wood chips, paper, and ordinary plastic packaging while washing the surface during the same cleaning pass.

A 45.3" cleaning width and manufacturer-rated maximum coverage of approximately 61,900 Sq. Ft. per hour support efficient cleaning across large areas. Actual productivity depends on the layout, debris load, obstacles, cleaning settings, and servicing requirements.

Separate Debris and Water Collection

The COMBO incorporates three separate containers:

  • 26.4-gallon debris container for collected solid waste.
  • 19.8-gallon clean-water tank for cleaning operations.
  • 13.2-gallon recovery tank for dirty-water collection.

Automatic debris dumping and support for manual or automatic water replenishment help simplify servicing between cleaning tasks.

Water-based dust suppression

The vacuum sweeping system uses water-based dust suppression to help control airborne particles during debris collection. This design avoids the disposable dust filters and central sweeping broom used in conventional mechanical sweepers, helping reduce consumable requirements. Brushes, the washing assembly, and water-system components still require routine inspection and maintenance.

Autonomous cleaning and obstacle detection

A multispectral obstacle-detection system supports operation in environments shared with people. The robot follows configured cleaning paths, while its chassis supports movement across suitable indoor floors and outdoor paved surfaces.

Operators can create cleaning zones and routes through the Autonomics FLEET platform, allowing the robot to perform repeatable cleaning tasks across designated areas.

Cloud-based scheduling, monitoring, and reporting

Autonomics FLEET provides centralized tools for managing daily cleaning operations, including:

  • Map-based cleaning-zone configuration.
  • Automatic cleaning-path routing.
  • Calendar-based task scheduling.
  • Remote monitoring.
  • Automatic reporting.
  • Access to technical support.
  • These tools help facility teams schedule recurring cleaning and track completed work.

Electric power for extended cleaning

A 48-volt, 200-amp-hour lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on cleaning settings and operating conditions.

Fluid cooling supports hot-climate operation when the robot is equipped with the appropriate configuration.

Optional automated maintenance dock

The optional Autonomics DOCK brings multiple servicing functions into one station, including automatic debris dumping, water replenishment, body washing, waste-container washing, drying, and charging.

This configuration reduces the manual handling required between cleaning cycles and supports repeated scheduled operation.

Specs

  • Cleaning Functions: Vacuum sweeping and simultaneous floor washing
  • Cleaning Width: 45.3"
  • Max Cleaning Coverage: 61,900 Sq. Ft/Hour
  • Debris Container: 26.4 gallons
  • Clean-Water Tank: 19.8 gallons
  • Wastewater Tank: 13.2 gallons
  • Published Runtime: 4–6 hours
  • Battery: Lithium iron phosphate (48 volts, 200 amp-hours)
  • Maximum Cleaning Speed: 3.1 mph
  • Maximum Travel Speed: 4.3 mph
  • Maximum Slope: 10°
  • Maximum ditch-crossing width: 2.8"
  • Maximum bump-crossing height: 2.8"
  • Minimum turning radius: 78.7"
  • Dimensions: 84.1" L × 41.9" W × 45.2" H
  • Weight: 1,257 Lbs.
  • Operating Temperature: 32°F to 140°F
  • Storage Temperature: −13°F to 140°F
  • Communication: 5G
  • Fleet management: Autonomics FLEET cloud platform

Operating Requirements

Designed for designated outdoor hard surfaces, the A302 collects dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris sizes up to approximately 3.1 inches, and gravel up to approximately 2 inches.

Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance. Use is limited to dry conditions without rain, snow, or heavy fog; wet pavement and deep puddles must be avoided. The A302 is not intended for public-road cleaning or collection of branches, ropes, hazardous materials, or hot waste.

In the Box

Included components vary by configuration and quotation. Confirm the supplied robot, charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare before ordering.

Media

Product videos and supporting documents are available from Hero LifeCare upon request.

FAQs

Is deployment and operator training available?

Hero LifeCare can help with site review, setup, operator training, and ongoing support for this model.

What is included with the robot?

Included equipment depends on the selected configuration. Confirm the current quote for charging equipment, accessories, documentation, and optional attachments or workstations.

Are service and extended coverage options available?

Contact Hero LifeCare to review available service plans and extended coverage for this robot.

Description
Features
Specifications
FAQ
Warranty

Autonomics COMBO A302-1 Autonomous Sweeper/Scrubber

The Autonomics COMBO A302-1 is a fully electric, autonomous cleaning robot that combines sweeping, vacuum collection, and floor washing in one pass. Designed for large indoor and outdoor hard-surface areas, it collects loose debris while washing the floor, reducing the need for separate pre-sweeping and scrubbing operations.

Ideal applications include warehouses, manufacturing facilities, commercial properties, tiled public spaces, covered parking areas, and industrial campuses.

Sweep, vacuum, and wash in one pass

The COMBO combines side-brush sweeping and vacuum suction with an integrated floor-washing assembly. It collects dust, dirt, wood chips, paper, and ordinary plastic packaging while washing the surface during the same cleaning pass.

A 45.3" cleaning width and manufacturer-rated maximum coverage of approximately 61,900 Sq. Ft. per hour support efficient cleaning across large areas. Actual productivity depends on the layout, debris load, obstacles, cleaning settings, and servicing requirements.

Separate Debris and Water Collection

The COMBO incorporates three separate containers:

  • 26.4-gallon debris container for collected solid waste.
  • 19.8-gallon clean-water tank for cleaning operations.
  • 13.2-gallon recovery tank for dirty-water collection.

Automatic debris dumping and support for manual or automatic water replenishment help simplify servicing between cleaning tasks.

Water-based dust suppression

The vacuum sweeping system uses water-based dust suppression to help control airborne particles during debris collection. This design avoids the disposable dust filters and central sweeping broom used in conventional mechanical sweepers, helping reduce consumable requirements. Brushes, the washing assembly, and water-system components still require routine inspection and maintenance.

Autonomous cleaning and obstacle detection

A multispectral obstacle-detection system supports operation in environments shared with people. The robot follows configured cleaning paths, while its chassis supports movement across suitable indoor floors and outdoor paved surfaces.

Operators can create cleaning zones and routes through the Autonomics FLEET platform, allowing the robot to perform repeatable cleaning tasks across designated areas.

Cloud-based scheduling, monitoring, and reporting

Autonomics FLEET provides centralized tools for managing daily cleaning operations, including:

  • Map-based cleaning-zone configuration.
  • Automatic cleaning-path routing.
  • Calendar-based task scheduling.
  • Remote monitoring.
  • Automatic reporting.
  • Access to technical support.
  • These tools help facility teams schedule recurring cleaning and track completed work.

Electric power for extended cleaning

A 48-volt, 200-amp-hour lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on cleaning settings and operating conditions.

Fluid cooling supports hot-climate operation when the robot is equipped with the appropriate configuration.

Optional automated maintenance dock

The optional Autonomics DOCK brings multiple servicing functions into one station, including automatic debris dumping, water replenishment, body washing, waste-container washing, drying, and charging.

This configuration reduces the manual handling required between cleaning cycles and supports repeated scheduled operation.

Specs

  • Cleaning Functions: Vacuum sweeping and simultaneous floor washing
  • Cleaning Width: 45.3"
  • Max Cleaning Coverage: 61,900 Sq. Ft/Hour
  • Debris Container: 26.4 gallons
  • Clean-Water Tank: 19.8 gallons
  • Wastewater Tank: 13.2 gallons
  • Published Runtime: 4–6 hours
  • Battery: Lithium iron phosphate (48 volts, 200 amp-hours)
  • Maximum Cleaning Speed: 3.1 mph
  • Maximum Travel Speed: 4.3 mph
  • Maximum Slope: 10°
  • Maximum ditch-crossing width: 2.8"
  • Maximum bump-crossing height: 2.8"
  • Minimum turning radius: 78.7"
  • Dimensions: 84.1" L × 41.9" W × 45.2" H
  • Weight: 1,257 Lbs.
  • Operating Temperature: 32°F to 140°F
  • Storage Temperature: −13°F to 140°F
  • Communication: 5G
  • Fleet management: Autonomics FLEET cloud platform

Operating Requirements

Designed for designated outdoor hard surfaces, the A302 collects dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris sizes up to approximately 3.1 inches, and gravel up to approximately 2 inches.

Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance. Use is limited to dry conditions without rain, snow, or heavy fog; wet pavement and deep puddles must be avoided. The A302 is not intended for public-road cleaning or collection of branches, ropes, hazardous materials, or hot waste.

In the Box

Included components vary by configuration and quotation. Confirm the supplied robot, charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare before ordering.

Media

Product videos and supporting documents are available from Hero LifeCare upon request.

FAQs

Is deployment and operator training available?

Hero LifeCare can help with site review, setup, operator training, and ongoing support for this model.

What is included with the robot?

Included equipment depends on the selected configuration. Confirm the current quote for charging equipment, accessories, documentation, and optional attachments or workstations.

Are service and extended coverage options available?

Contact Hero LifeCare to review available service plans and extended coverage for this robot.

  • Three cleaning functions in one pass: The autonomous sweeper scrubber robot sweeps, vacuums debris, and washes hard floors simultaneously.
  • Wide-area productivity: A 45.3-inch cleaning width and manufacturer-rated maximum coverage of approximately 61,900 square feet per hour support cleaning large facilities.
  • Separate collection tanks: Dedicated containers hold solid debris, clean water, and recovered wastewater.
  • Water-based dust suppression: Helps control airborne particles during vacuum sweeping without disposable dust filters.
  • Autonomous navigation: Multispectral obstacle detection and configured cleaning routes support operation in designated areas shared with people.
  • Cloud-based fleet management: Autonomics FLEET supports zone mapping, route planning, task scheduling, remote monitoring, and reporting.
  • Rechargeable electric operation: A 48-volt lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on conditions and settings.
  • Optional automated dock: The Autonomics DOCK can provide charging, water replenishment, debris dumping, washing, and drying, depending on configuration.
SpecificationDetails
ModelAutonomics COMBO A302-1
Cleaning functionsVacuum sweeping and simultaneous floor washing
Cleaning width45.3 inches
Maximum rated cleaning coverageApproximately 61,900 square feet per hour
Debris container capacity26.4 gallons
Clean-water tank capacity19.8 gallons
Recovery tank capacity13.2 gallons
Published runtimeApproximately 4–6 hours
BatteryLithium iron phosphate, 48 volts, 200 amp-hours
Maximum cleaning speed3.1 mph
Maximum travel speed4.3 mph
Maximum slope10°
Maximum ditch-crossing width2.8 inches
Maximum bump-crossing height2.8 inches
Minimum turning radius78.7 inches
Dimensions (L × W × H)84.1 × 41.9 × 45.2 inches
Weight1,257 lbs
Operating temperature32°F to 140°F
Storage temperature−13°F to 140°F
Communication5G
Fleet managementAutonomics FLEET cloud platform
Suitable surfaces and conditionsDesignated hard surfaces; operate in dry conditions. Avoid rain, snow, heavy fog, wet pavement, and deep puddles.
Operating requirementsTrained personnel, site mapping, suitable cellular connectivity, and regular maintenance

Actual cleaning productivity and runtime vary with site layout, debris load, obstacles, settings, and servicing needs. Confirm the selected configuration and included equipment with Hero LifeCare before ordering.

  • What does the Autonomics COMBO A302-1 clean in one pass?

    This autonomous sweeper scrubber robot combines side-brush sweeping, vacuum debris collection, and floor washing in a single pass across suitable hard surfaces.

  • How large an area can it clean?

    The manufacturer-rated maximum coverage is approximately 61,900 square feet per hour. Actual productivity depends on the site layout, debris, obstacles, cleaning settings, and servicing requirements.

  • How long does the battery run?

    The published operating time is approximately 4–6 hours from its 48-volt, 200-amp-hour lithium iron phosphate battery. Runtime varies with operating conditions and cleaning settings.

  • Can the robot operate outdoors?

    It is designed for designated outdoor paved surfaces as well as suitable indoor floors. Use it only in dry conditions; avoid rain, snow, heavy fog, wet pavement, and deep puddles. It is not intended for public-road cleaning.

  • What debris can the A302 collect?

    It is designed for debris such as dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris up to approximately 3.1 inches and gravel up to approximately 2 inches. It is not intended for branches, ropes, hazardous materials, or hot waste.

  • Is setup and operator training available?

    Hero LifeCare can help with site review, setup, operator training, and ongoing support. Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance.

  • What equipment is included, and are service options available?

    Included equipment varies by configuration and quotation. Confirm charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare. Contact Hero LifeCare to ask about service plans and extended coverage.

Warranty duration and coverage details are not specified in the available product information. Contact Hero LifeCare to confirm the warranty terms, covered components, service process, and any available extended coverage or service plans before ordering.

Description

Autonomics COMBO A302-1 Autonomous Sweeper/Scrubber

The Autonomics COMBO A302-1 is a fully electric, autonomous cleaning robot that combines sweeping, vacuum collection, and floor washing in one pass. Designed for large indoor and outdoor hard-surface areas, it collects loose debris while washing the floor, reducing the need for separate pre-sweeping and scrubbing operations.

Ideal applications include warehouses, manufacturing facilities, commercial properties, tiled public spaces, covered parking areas, and industrial campuses.

Sweep, vacuum, and wash in one pass

The COMBO combines side-brush sweeping and vacuum suction with an integrated floor-washing assembly. It collects dust, dirt, wood chips, paper, and ordinary plastic packaging while washing the surface during the same cleaning pass.

A 45.3" cleaning width and manufacturer-rated maximum coverage of approximately 61,900 Sq. Ft. per hour support efficient cleaning across large areas. Actual productivity depends on the layout, debris load, obstacles, cleaning settings, and servicing requirements.

Separate Debris and Water Collection

The COMBO incorporates three separate containers:

  • 26.4-gallon debris container for collected solid waste.
  • 19.8-gallon clean-water tank for cleaning operations.
  • 13.2-gallon recovery tank for dirty-water collection.

Automatic debris dumping and support for manual or automatic water replenishment help simplify servicing between cleaning tasks.

Water-based dust suppression

The vacuum sweeping system uses water-based dust suppression to help control airborne particles during debris collection. This design avoids the disposable dust filters and central sweeping broom used in conventional mechanical sweepers, helping reduce consumable requirements. Brushes, the washing assembly, and water-system components still require routine inspection and maintenance.

Autonomous cleaning and obstacle detection

A multispectral obstacle-detection system supports operation in environments shared with people. The robot follows configured cleaning paths, while its chassis supports movement across suitable indoor floors and outdoor paved surfaces.

Operators can create cleaning zones and routes through the Autonomics FLEET platform, allowing the robot to perform repeatable cleaning tasks across designated areas.

Cloud-based scheduling, monitoring, and reporting

Autonomics FLEET provides centralized tools for managing daily cleaning operations, including:

  • Map-based cleaning-zone configuration.
  • Automatic cleaning-path routing.
  • Calendar-based task scheduling.
  • Remote monitoring.
  • Automatic reporting.
  • Access to technical support.
  • These tools help facility teams schedule recurring cleaning and track completed work.

Electric power for extended cleaning

A 48-volt, 200-amp-hour lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on cleaning settings and operating conditions.

Fluid cooling supports hot-climate operation when the robot is equipped with the appropriate configuration.

Optional automated maintenance dock

The optional Autonomics DOCK brings multiple servicing functions into one station, including automatic debris dumping, water replenishment, body washing, waste-container washing, drying, and charging.

This configuration reduces the manual handling required between cleaning cycles and supports repeated scheduled operation.

Specs

  • Cleaning Functions: Vacuum sweeping and simultaneous floor washing
  • Cleaning Width: 45.3"
  • Max Cleaning Coverage: 61,900 Sq. Ft/Hour
  • Debris Container: 26.4 gallons
  • Clean-Water Tank: 19.8 gallons
  • Wastewater Tank: 13.2 gallons
  • Published Runtime: 4–6 hours
  • Battery: Lithium iron phosphate (48 volts, 200 amp-hours)
  • Maximum Cleaning Speed: 3.1 mph
  • Maximum Travel Speed: 4.3 mph
  • Maximum Slope: 10°
  • Maximum ditch-crossing width: 2.8"
  • Maximum bump-crossing height: 2.8"
  • Minimum turning radius: 78.7"
  • Dimensions: 84.1" L × 41.9" W × 45.2" H
  • Weight: 1,257 Lbs.
  • Operating Temperature: 32°F to 140°F
  • Storage Temperature: −13°F to 140°F
  • Communication: 5G
  • Fleet management: Autonomics FLEET cloud platform

Operating Requirements

Designed for designated outdoor hard surfaces, the A302 collects dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris sizes up to approximately 3.1 inches, and gravel up to approximately 2 inches.

Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance. Use is limited to dry conditions without rain, snow, or heavy fog; wet pavement and deep puddles must be avoided. The A302 is not intended for public-road cleaning or collection of branches, ropes, hazardous materials, or hot waste.

In the Box

Included components vary by configuration and quotation. Confirm the supplied robot, charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare before ordering.

Media

Product videos and supporting documents are available from Hero LifeCare upon request.

FAQs

Is deployment and operator training available?

Hero LifeCare can help with site review, setup, operator training, and ongoing support for this model.

What is included with the robot?

Included equipment depends on the selected configuration. Confirm the current quote for charging equipment, accessories, documentation, and optional attachments or workstations.

Are service and extended coverage options available?

Contact Hero LifeCare to review available service plans and extended coverage for this robot.

Features
  • Three cleaning functions in one pass: The autonomous sweeper scrubber robot sweeps, vacuums debris, and washes hard floors simultaneously.
  • Wide-area productivity: A 45.3-inch cleaning width and manufacturer-rated maximum coverage of approximately 61,900 square feet per hour support cleaning large facilities.
  • Separate collection tanks: Dedicated containers hold solid debris, clean water, and recovered wastewater.
  • Water-based dust suppression: Helps control airborne particles during vacuum sweeping without disposable dust filters.
  • Autonomous navigation: Multispectral obstacle detection and configured cleaning routes support operation in designated areas shared with people.
  • Cloud-based fleet management: Autonomics FLEET supports zone mapping, route planning, task scheduling, remote monitoring, and reporting.
  • Rechargeable electric operation: A 48-volt lithium iron phosphate battery provides a published operating time of approximately 4–6 hours, depending on conditions and settings.
  • Optional automated dock: The Autonomics DOCK can provide charging, water replenishment, debris dumping, washing, and drying, depending on configuration.
Specifications
SpecificationDetails
ModelAutonomics COMBO A302-1
Cleaning functionsVacuum sweeping and simultaneous floor washing
Cleaning width45.3 inches
Maximum rated cleaning coverageApproximately 61,900 square feet per hour
Debris container capacity26.4 gallons
Clean-water tank capacity19.8 gallons
Recovery tank capacity13.2 gallons
Published runtimeApproximately 4–6 hours
BatteryLithium iron phosphate, 48 volts, 200 amp-hours
Maximum cleaning speed3.1 mph
Maximum travel speed4.3 mph
Maximum slope10°
Maximum ditch-crossing width2.8 inches
Maximum bump-crossing height2.8 inches
Minimum turning radius78.7 inches
Dimensions (L × W × H)84.1 × 41.9 × 45.2 inches
Weight1,257 lbs
Operating temperature32°F to 140°F
Storage temperature−13°F to 140°F
Communication5G
Fleet managementAutonomics FLEET cloud platform
Suitable surfaces and conditionsDesignated hard surfaces; operate in dry conditions. Avoid rain, snow, heavy fog, wet pavement, and deep puddles.
Operating requirementsTrained personnel, site mapping, suitable cellular connectivity, and regular maintenance

Actual cleaning productivity and runtime vary with site layout, debris load, obstacles, settings, and servicing needs. Confirm the selected configuration and included equipment with Hero LifeCare before ordering.

FAQ
  • What does the Autonomics COMBO A302-1 clean in one pass?

    This autonomous sweeper scrubber robot combines side-brush sweeping, vacuum debris collection, and floor washing in a single pass across suitable hard surfaces.

  • How large an area can it clean?

    The manufacturer-rated maximum coverage is approximately 61,900 square feet per hour. Actual productivity depends on the site layout, debris, obstacles, cleaning settings, and servicing requirements.

  • How long does the battery run?

    The published operating time is approximately 4–6 hours from its 48-volt, 200-amp-hour lithium iron phosphate battery. Runtime varies with operating conditions and cleaning settings.

  • Can the robot operate outdoors?

    It is designed for designated outdoor paved surfaces as well as suitable indoor floors. Use it only in dry conditions; avoid rain, snow, heavy fog, wet pavement, and deep puddles. It is not intended for public-road cleaning.

  • What debris can the A302 collect?

    It is designed for debris such as dust, sand, leaves, cigarette butts, and ordinary paper or plastic litter. The manual specifies debris up to approximately 3.1 inches and gravel up to approximately 2 inches. It is not intended for branches, ropes, hazardous materials, or hot waste.

  • Is setup and operator training available?

    Hero LifeCare can help with site review, setup, operator training, and ongoing support. Operation requires trained personnel, site mapping, suitable cellular connectivity, and regular maintenance.

  • What equipment is included, and are service options available?

    Included equipment varies by configuration and quotation. Confirm charging equipment, accessories, documentation, and any optional dock, workstation, or attachment with Hero LifeCare. Contact Hero LifeCare to ask about service plans and extended coverage.

Warranty

Warranty duration and coverage details are not specified in the available product information. Contact Hero LifeCare to confirm the warranty terms, covered components, service process, and any available extended coverage or service plans before ordering.